RF CARD Reader RF-85

RF CARD Reader RF-85

RF-85 is an intelligent time recording terminals designed to meet variant applications in time attendance and access control, lift control & ARM/DISARM security requirements. Each terminal can be operated independent simply or through PC/Internet adapter PC-T100 to fulfill the multiple doors access system. The recording terminal includes nearly all the necessary functions for time recording and access control with bountiful manual & PC executed commanded functions as well as friendly operation commanded for manual operation.


  

 

 
 
 

Features

Features for time recording application:

·             Selectable batch or real time operation mode.

·             79 duty codes, duty name defined by PC.

·             Possible in 8 digits ID for time attendance recording.

·             Totally 192 alarm schedules (8 schedules per hour) dry contacts output for periodic belling.

·             Could collect data by real time or one by one events or massive block dump.

·             High capacity with 8 digits card number. ( Either checking or without checking personal map )

Main features for access control application:

·             System parameters and personal access map can be downloaded by PC or manually  programmed through keypad.

·             The personal access map is consisted of card ID, staff number and name, PIN and Time Zone Status, expiry date and Anti-passback.

·             Excellent multiple operation modes :(1) Card only (2) Card + PIN (3)Door PIN only  (4)Card Number+PIN (5)Free access (6) Automatic operation mode by time zones.

·             All operation modes with PIN are supported by selectable duress function. Also, keypad is lockable to become dumb.

·             Individual personal access map can be edited by block range add or delete card in group basis by on-lined PC or by manual thru. single / block range card number or by directly reading card thru. learning mode.

·             Selectable immediate or batched conditional sorting and then printing out events thru. Serial output interface.

·             With complete door release, held monitoring and intruded alarm period and error trials.

·             Supports 8/24/48/64/96 floors lift access control.

·             Full APB (anti-passback), time zone.

·             Could dump all personal map in system by single PC or manual command.

 

　

Specifications

Dimensions

116mm(L) x 81mm(W) x 30mm(H)

Weight

145g± 5%

Power supply

DC 12V±10%, 25mA~60mA(not include power requirement for lock & alarm)

Transmission rate

Default 9,600 bps N,8,1(2,400/4,800)(19,200bps/38,400<selectable>)

Operating temperature

0℃ ~ 70℃

Operating humidity

10%~90%

Waterproof

IP64

Keypad

3 × 4 keypad for system programming, pass word entry or duty code selection.

Password

Programmable 4 digits PIN for each person

Serial interface

RS-485 & RS-232

Serial output

 1.To link with PG-1050B printer interface adaptor for Centronics printer port    or direct to serial printer
2. To drive DDR (digital door relay) for secure assess control function.
3. To drive 8/24/48/64 relay output modules for lifts access control
4. Bountiful application functions requested by customer

Events/ Card capacity

(1) K Series: 1,000 card capacity,500 events.

(2) L Series: 2,000 card capacity,1,000 events.

(3) M Series: 30,000 card capacity,10,000 events.
(4) N Series: 11,000 card capacity,32,000 events.

(5) P Series: 11,000 card capacity,8,000 events.
(6) X Series: 32,000 card capacity, 32,000 events.

Other capacity combination requested by order

Card standard

EM 125KHz / Mifare 13.56MHz(ISO 14443A or ISO 14443B) / HID 125KHz(Depending on order)
Wiegand 26/34 bits port for any kind of reader

External Reader

With one port for external Wiegand (26/34 bits definable by command) & ABA input(by order)